Safety Equipment & PPE

NLS supplies safety footwear and PPE kits for Saudi construction and industrial sites, sourcing steel-toe and composite-toe boots rated to EN ISO 20345 alongside coverall, helmet, glove and eye-protection kits matched to a project's HSE requirements. Bulk orders price in USD or SAR by delivery point, with sizing runs quoted against actual workforce headcount.

What NLS supplies in safety equipment and PPE

Saudi site HSE plans specify two things on almost every mobilization list: certified safety footwear and a PPE kit covering the rest of the body. NLS sources steel-toe and composite-toe safety boots rated to EN ISO 20345 for impact and compression resistance, with options for oil-resistant soles and electrical hazard ratings depending on the work area. PPE kits build out from there: coveralls in flame-resistant or standard cotton-poly blends, hard hats meeting EN 397, cut-resistant and chemical-resistant gloves matched to the trade, and eye and face protection from basic safety glasses up to full face shields for grinding and cutting work.

Sizing is where a bulk PPE order usually goes wrong: a generic small/medium/large split rarely matches an actual site workforce, so NLS quotes against a real headcount and size breakdown rather than a flat percentage estimate, which cuts down on the mid-project reorder that happens when half a shipment turns out to be the wrong size.

How sourcing and pricing work

Footwear and PPE pricing depends on certification level, material (leather versus synthetic upper, standard versus flame-resistant fabric) and order volume, since unit cost drops meaningfully past a few hundred pieces. NLS quotes in USD for imported branded items and SAR for locally stocked lines, whichever gets the project the faster delivery, with lead time running one to three weeks for common footwear sizes and standard PPE kits held in regional stock, and four to eight weeks for less common sizes, custom branding, or flame-resistant coverall runs made to order.

Why project buyers use NLS for safety equipment

Hospital and aviation infrastructure sites in Saudi Arabia, both categories NLS currently supplies into, run strict HSE inductions that turn away a worker without the right-rated boot or glove on day one, so getting the certification level right on the PO matters more than getting a lower unit price. NLS is a Saudi-registered company based in Riyadh and quotes PPE alongside the rest of a project's equipment package, tools, welding gear and lifting equipment included, so one RFQ covers both the hardware going into the ground and the gear the crew wears while installing it.

Related products

Safety Footwear

Safety footwear protects against impact, compression, puncture, and slip hazards on a construction or industrial site, rated by toe protection class and sole properties rather than picked as general workwear. NLS sources steel-toe and composite-toe safety boots to EN ISO 20345 (S1 to S3 protection classes) and ASTM F2413, for construction, MEP, and plant maintenance workforces on Saudi projects.

PPE Kits

PPE kits bundle the coverall, helmet, gloves, eye protection, and hearing protection a site role needs into one package matched to a specific hazard exposure, rather than issued as unrelated individual items. NLS sources standard construction PPE kits and role-specific kits (welding, confined space, working-at-height) to EN 340/388/397 and ANSI Z87.1, sized for bulk workforce mobilization on Saudi project sites.

Safety Shoes & Boots

Safety shoes and boots protect the foot through two engineered components: a toe cap that absorbs impact and compression, and a sole built for the specific hazard underfoot. NLS sources steel-toe and composite-toe (fiberglass, kevlar) safety shoes to EN ISO 20345, with oil-resistant, chemical-resistant, and anti-static sole compounds matched to a site's actual floor hazard.

Safety Helmets

Industrial safety helmets protect the head from falling objects, impact, and, on electrical work, contact with live conductors. NLS sources helmets to EN 397, the general industrial standard, and ANSI Z89.1 for projects following US classification, in Type I (top impact) and Class E (electrical-rated to 20,000 volts) configurations for Saudi construction and utility sites.

Work Gloves

Work gloves protect the hand against cut, abrasion, tear, and puncture hazards specific to a trade, rated under a tested performance scale rather than a generic "heavy duty" label. NLS sources mechanical-risk gloves to EN 388 (cut, abrasion, tear, puncture levels) and general glove requirements under EN 420, in coated, leather, and cut-resistant liner constructions for Saudi construction trades.

Eye & Face Protection

Eye and face protection guards against flying particles, dust, chemical splash, and radiation depending on the task, ranging from basic safety glasses to full face shields. NLS sources eyewear and face protection to EN 166, the personal eye protection standard covering impact resistance classes and optical quality, for grinding, cutting, chemical handling, and general site work on Saudi projects.

Fall Protection Equipment

Fall protection equipment stops or restrains a fall from height through three linked components: a body support, a connector, and an anchor point, each rated to a specific standard. NLS sources full body harnesses to EN 361, restraint belts to EN 358, and energy-absorbing lanyards to EN 355, for elevated work on Saudi construction, hangar, and heliport sites.

Respiratory Protection

Respiratory protection filters dust, particulates, or specific gas hazards from the air a worker breathes, rated by filter class to the actual hazard level on site, not a generic dust-mask assumption. NLS sources filtering half masks to EN 149 (FFP1 to FFP3 classes) and particle filters to EN 143, for dust, fume, and general particulate hazards on Saudi construction sites.

High-Visibility Clothing

High-visibility clothing keeps a worker visible to vehicle and equipment operators through fluorescent background material and reflective tape, rated by class against the amount of visible-area coverage. NLS sources hi-vis vests, jackets, and coveralls to EN ISO 20471 (Class 1 to Class 3), for road, airside, and general construction crews working near moving vehicles or equipment on Saudi project sites.

Gas Detectors

Gas detectors monitor the surrounding air for flammable, toxic, or oxygen-deficient conditions and alarm before a concentration reaches a dangerous threshold. NLS sources portable single-gas and multi-gas detectors built to EN 60079-29-1 for flammable gas detection, with ATEX or IECEx zone-rated enclosures, for confined-space entry and hazardous-area work on Saudi industrial and construction sites.

Frequently Asked Questions

Who supplies safety footwear in Riyadh?+

NLS sources steel-toe and composite-toe safety boots rated to EN ISO 20345 for Saudi construction and industrial sites, quoted in bulk against actual workforce headcount and size breakdown.

What's included in an NLS PPE kit?+

A typical kit covers coveralls, an EN 397 rated hard hat, cut-resistant or chemical-resistant gloves matched to the trade, and eye or face protection, quoted alongside the certified safety boots as one order.

How does NLS handle sizing for a bulk PPE order?+

NLS quotes against a real workforce headcount and size breakdown rather than a flat small/medium/large split, which cuts down on the mid-project reorder that follows a mismatched shipment.

How fast can NLS deliver PPE to a Saudi project site?+

Common footwear sizes and standard PPE kits held in regional stock typically move in one to three weeks, extending to four to eight weeks for less common sizes or flame-resistant coveralls made to order.

Does NLS quote PPE alongside other equipment categories?+

Yes. NLS quotes safety footwear and PPE kits alongside tools, welding gear and lifting equipment for the same project, so one RFQ covers both the hardware and the gear the crew wears installing it.