NLS Industries
Eye & Face Protection

Eye & Face Protection

Eye and face protection guards against flying particles, dust, chemical splash, and radiation depending on the task, ranging from basic safety glasses to full face shields. NLS sources eyewear and face protection to EN 166, the personal eye protection standard covering impact resistance classes and optical quality, for grinding, cutting, chemical handling, and general site work on Saudi projects.

EN 166 sets impact resistance classes, S (basic), F (low energy impact), B (medium energy impact), A (high energy impact), alongside an optical class (1 is the best quality for continuous wear, 3 is the lowest, occasional use only), and the frame markings tell a buyer exactly what the item is rated for. A generic "safety glasses" label without those markings doesn't say much about the actual protection level.

NLS sources safety spectacles for general dust and particle protection, the lightest and most-worn item on a site, so fit and anti-fog coating matter for whether a worker actually keeps them on. Sealed goggles cover chemical splash or fine dust where a spectacle's open sides leave a gap. Face shields, mounted on a helmet bracket or dedicated headgear, cover grinding, cutting, and impact hazards where the whole face needs protection, not just the eyes. Anti-fog and anti-scratch lens coatings are both available, and both affect how long a worker keeps the item on rather than pushing it up once it fogs.

On Saudi projects, general site labor typically needs basic impact-rated glasses, workshop grinding and cutting stations need face shields, and facility engineering rooms handling chemicals need sealed goggles. Anti-fog performance and comfort often drive actual compliance in outdoor work under Saudi heat and humidity more than the base impact class alone does.

NLS quotes eye and face protection against the task hazard (impact class needed, chemical splash versus dust versus radiation), lens tint or coating, and frame or full-face-shield configuration, and returns a priced quote in USD. Standard safety glasses and goggles in common configurations typically source faster than specialty face shields or tinted lenses built to a specific project spec.

Specifications

  • ✓Standard referenced: EN 166 (personal eye protection)
  • ✓Impact resistance classes: S (basic), F (low energy), B (medium energy), A (high energy)
  • ✓Optical classes: 1 (best quality, continuous wear) through 3 (occasional use only)
  • ✓Configurations: safety spectacles, sealed goggles (chemical/dust), face shields on helmet mount or headgear
  • ✓Lens treatments available: anti-fog coating, anti-scratch coating, tinted lenses for glare/UV
  • ✓Typical use: general site labor, grinding and cutting stations, chemical handling rooms
  • ✓Frame markings identify the exact impact class and optical class rated for that item

Frequently Asked Questions

What does the impact class marking (S/F/B/A) on safety eyewear mean?+

The class marks the impact energy level the lens or frame passed in testing, from S basic to A high energy, and it's what actually determines the type of hazard the item protects against.

When is a sealed goggle needed instead of standard safety glasses?+

A sealed goggle is needed for chemical splash or fine dust exposure, since the open sides on standard safety glasses leave a gap that lets spray or fine particles in from the side.

Does NLS supply face shields for grinding and cutting work?+

Yes, NLS sources face shields mounted on a helmet bracket or dedicated headgear, built to protect the whole face during grinding and cutting work where eye protection alone isn't enough.

Who supplies Eye & Face Protection in Saudi Arabia?+

NLS Industries (Northlane Solutions Company) supplies Eye & Face Protection across Saudi Arabia, including Riyadh, Jeddah, Dammam and Jubail. Send your specification and quantities to info@nlsindustries.com or info@northlanesolution.com for a quotation.

Related products

Fall Protection Equipment

Fall Protection Equipment

Fall protection equipment stops or restrains a fall from height through three linked components: a body support, a connector, and an anchor point, each rated to a specific standard. NLS sources full body harnesses to EN 361, restraint belts to EN 358, and energy-absorbing lanyards to EN 355, for elevated work on Saudi construction, hangar, and heliport sites.

Respiratory Protection

Respiratory Protection

Respiratory protection filters dust, particulates, or specific gas hazards from the air a worker breathes, rated by filter class to the actual hazard level on site, not a generic dust-mask assumption. NLS sources filtering half masks to EN 149 (FFP1 to FFP3 classes) and particle filters to EN 143, for dust, fume, and general particulate hazards on Saudi construction sites.

High-Visibility Clothing

High-Visibility Clothing

High-visibility clothing keeps a worker visible to vehicle and equipment operators through fluorescent background material and reflective tape, rated by class against the amount of visible-area coverage. NLS sources hi-vis vests, jackets, and coveralls to EN ISO 20471 (Class 1 to Class 3), for road, airside, and general construction crews working near moving vehicles or equipment on Saudi project sites.

Gas Detectors

Gas Detectors

Gas detectors monitor the surrounding air for flammable, toxic, or oxygen-deficient conditions and alarm before a concentration reaches a dangerous threshold. NLS sources portable single-gas and multi-gas detectors built to EN 60079-29-1 for flammable gas detection, with ATEX or IECEx zone-rated enclosures, for confined-space entry and hazardous-area work on Saudi industrial and construction sites.

Safety Footwear

Safety Footwear

Safety footwear protects against impact, compression, puncture, and slip hazards on a construction or industrial site, rated by toe protection class and sole properties rather than picked as general workwear. NLS sources steel-toe and composite-toe safety boots to EN ISO 20345 (S1 to S3 protection classes) and ASTM F2413, for construction, MEP, and plant maintenance workforces on Saudi projects.

PPE Kits

PPE Kits

PPE kits bundle the coverall, helmet, gloves, eye protection, and hearing protection a site role needs into one package matched to a specific hazard exposure, rather than issued as unrelated individual items. NLS sources standard construction PPE kits and role-specific kits (welding, confined space, working-at-height) to EN 340/388/397 and ANSI Z87.1, sized for bulk workforce mobilization on Saudi project sites.

Guides

Available in

Get in touch

Send us your RFQ

Tell us what you need and we will come back with pricing and lead times.

+966 53 590 8101